Page 1 sur 1

Finish Fins

Posté : jeu. 13 juil. 2017 13:47
par Olivier44
FINISH™ Fast : https://www.finish-fins.com/finishfast/

The FINISH™ Fast is the ultimate weapon for pure racing, whether you want to go deep downwind on a flat speed spot or to outrace your competitors on a tighter course in choppy conditions. Designed as a speed/slalom model the fin has an extremely efficient outline and is very secure. Currently available in a slalom layup with low stiffness and a speed layup with high stiffness.

The speed layup has a bit more power in the tip, making it very efficient. Sailed a size smaller than the slalom model this fin is very fast on flat water and will let the board fly crosswind to keep power and accelerating during a slingshot. Very well suited for heavier (85+ kg) people.

The slalom layup however has a slight de-power in the tip to keep control on a tighter course. Due to the low bending stiffness the fin absorbs the chop with ease and gybing performance is excellent.

Sizes: 34-40 cm
Layups: Speed – high stiffness / Slalom – low stiffness
Finbox: Tuttlebox
Materials: Carbon-glass composite

€279.00–€289.00

Image

Re: Finish Fins

Posté : jeu. 13 juil. 2017 18:01
par Ricou
A force de voir des copié-collé d'oultline type "Z", c'est étonnant de revoir des ailerons de forme elliptique.

Re: Finish Fins

Posté : jeu. 13 juil. 2017 18:06
par yann44240
Ricou a écrit :A force de voir des copié-collé d'oultline type "Z", c'est étonnant de revoir des ailerons de forme elliptique.
L'outline change... par contre la gamme de prix est la même... :?

Re: Finish Fins

Posté : ven. 14 juil. 2017 12:15
par francois
C'est la centaine en-dessous :wink:

Re: Finish Fins

Posté : mer. 1 juil. 2020 18:20
par Olivier44
Finish proudly announces the new dedicated slalom model "First". For over 12 months we have spent hours on R&D which resulted in a new outline, profile and bend curve. Utilizing new materials, but sticking to our RTM process providing you the best laminate and finish we can. All brought together in a design that excels in difficult slalom conditions. Developed in close conjunction with Ennio Dal Pont Ita-465 and... well, more on that later this week!
Now available from 30 cm up to 46 cm.

Image

Image

Re: Finish Fins

Posté : lun. 6 juil. 2020 20:32
par Olivier44
Le nouveau site Finish Fins : www.finish-fins.com/

Re: Finish Fins

Posté : mer. 13 sept. 2023 16:38
par Olivier44
Le nouveau Finish First V2 : https://www.finish-fins.com/finishfirst/

Jordy Vonk about the performance of the Finish First V2 carbon fiber slalom fin :

Re: Finish Fins

Posté : ven. 15 nov. 2024 14:15
par Olivier44
Le nouveau site Finish Fins : www.finish-fins.com

Our new website is LIVE.
Select exactly the fin you want, use a secure payment and stay automatically updated on the status of your order.

Re: Finish Fins

Posté : lun. 10 févr. 2025 16:45
par Olivier44
Le Finish First V2 décliné en rouge et bleu : https://finish-fins.com/products/finish ... 8029329732
Image
Image

Re: Finish Fins

Posté : dim. 8 juin 2025 14:55
par Eliott_fra599
J'en ai acheté en 31 et 36 pour mes FMX
C'est juste superbe pour mes 74kg
Ils ont un superbe appui sans pour autant te renvoyer la planche dans les jambes (les chopper ont tendance a me faire éjecter) et les z sont trop souples pour moi, ils ne tiennent pas assez la board selon moi. Finish c'est entre les 2