GPS Locosys GT-31

La glisse pure et la course au chronomètre
Verrouillé
Avatar du membre
Olivier44
Messages : 16701
Enregistré le : lun. 21 juil. 2008 12:42
Localisation : Saint-Herblain
Contact :

GPS Locosys GT-31

Message par Olivier44 »

Configuration d'un GPS Locosys GT-31 :

- en version V1.4(B0315C)
- pour écriture sur une carte SD SanDisk 2 Go de fichiers .SBN 1 seconde
- sans la fonction Speed Genie

1. Charger la batterie du GPS au maximum

2. Sortir dehors, allumer le GPS et attendre la localisation satellites (45/60 secondes)

3. Paramétrer la langue en français :

SETTINGS / LANGUAGE / FRENCH

4. Vérifier la version du firmware

PARAMETRE / VERSION / V1.4(B0315C)

5. Paramétrer le GPS :

PARAMETRE / ZONE HEURE / OTHER + 1 en hiver et + 2 en été
PARAMETRE / UNITE / NM
PARAMETRE / DGPS SOURCE / ARRET
PARAMETRE / RETROECLAI / MARCHE
PARAMETRE / TPS RETROECLAI / ARRET
PARAMETRE / NOM UTILISATR / Olivier44
PARAMETRE / SPEED AVG TIME / 10
PARAMETRE / SPEED GENIE / ARRET
PARAMETRE / HOLD KEY / KEY LOCK

DATA LOGGER / INTERVAL / 0 ==> ARRET
DATA LOGGER / MIN SPEED / 0 ==> ARRET

6. Formater la carte SD/MMC si non reconnue par le GPS :

Les cartes testées pour fonctionner avec le GT-31 :arrow: http://www.locosystech.com/product.php?zln=en&id=30

MEMORY CARTE / LOG SWITCH / ARRET
Insérer la carte SD/MMC
Si la carte est reconnue, le GPS affiche après quelques secondes le message CARTE TROUVEE

MEMORY CARTE / FORMAT CARTE / OUI ==> FAT16
MEMORY CARTE / TAILLE MAXI / CARD SIZE
MEMORY CARTE / TX LOG NMEA / SBN 1SEC
MEMORY CARTE / LOG SWITCH / ON-FIX
MEMORY CARTE / MIN SPEED / 0 ==> ARRET

7. Charger le firmware V1.4(B0803T) :

Le firmware est disponible sur : http://mtbest.net/setting-up-navi-GT31.htm
Downloader => V1.4: GT31_FW_V1.4B0803T.ZIP

Sur http://www.locosystech.com/product.php?zln=en&id=30 puis onglet Download
Downloader => GT-31 USB Driver Only for Microsoft Windows 98/ME/2000/XP/Vista/Win7
Downloader => GT31 Updater_Installer

Suivre la procédure décrite dans http://mtbest.net/setting-up-navi-GT31.htm pour installer le firmware.
klesk01 a écrit :Pour basculer le micro-interrupteur du GT-31 :
Tu vires ta carte SD et tu poses le gps écran sur la table.
Là tu regardes par la fente de la carte (avec un peu de lumière c'est mieux) et tu verras, juste à l'entrée, sur le circuit imprimé, le micro switch noir sur fond vert avec sa sérigraphie blanche autour pour signaler sa position normale.
Avec une petite pointe tu peux le faire glisser sur la gauche.
8. Vérifier la version du firmware

PARAMETRE / VERSION / V1.4(B0803T)

9. Paramétrer le GPS :

MISC/TRIP AUTO SAVE / MARCHE
MISC/TRIP MIN SPEED / ARRET
MISC/MAX/NS MAX / MARCHE
MISC/HISTORY MAX / MARCHE
MISC/MAX SPEED / MARCHE
MISC/NS MAX AVG / MARCHE

Les documentations :

:arrow: Guide d'utilisation
:arrow: Setup Guide

Les tutoriels de paramétrage :

:arrow: nico-3430 sur Windsurfing33
:arrow: klesk01 sur le Forum du lac de Maine
:arrow: iron31 sur Transjaï
Avatar du membre
Olivier44
Messages : 16701
Enregistré le : lun. 21 juil. 2008 12:42
Localisation : Saint-Herblain
Contact :

Re: GPS Locosys GT-31

Message par Olivier44 »

Utilisation du GPS Locosys GT-31 :

1. AVANT la session :

Allumer le GPS.
Répondre OUI à NEW TRIP pour remettre les compteurs à zéro.
VITESSE/VIT MAXI
Appuyer 3 secondes sur le joystick pour bloquer les boutons.

2. APRES la session :

Appuyer 3 secondes sur le joystick pour débloquer les boutons.
Eteindre le GPS => un message indique qu'un nouveau fichier est enregistré automatiquement.
Retirer la SD-Card et l'insérer dans le lecteur de cartes du PC.
Sur la carte, dans le répertoire GPS_DATA se trouvent :
- un fichier .SNB contenant la trace de la session et exploitable directement par GPSAR-Pro.
- un fichier .SPD qui est un résumé de la session
Avatar du membre
Olivier44
Messages : 16701
Enregistré le : lun. 21 juil. 2008 12:42
Localisation : Saint-Herblain
Contact :

Re: GPS Locosys GT-31

Message par Olivier44 »

Plusieurs sources sur le net annoncent l'arrêt de la production des GT-31 et BGT-31.
La puce Sirf 3 ne serait plus produite par son fabriquant.
Sans puce, Locosys serait donc contraint d'arrêter la production du GT-31.
Avatar du membre
Olivier44
Messages : 16701
Enregistré le : lun. 21 juil. 2008 12:42
Localisation : Saint-Herblain
Contact :

Re: GPS Locosys GT-31

Message par Olivier44 »

http://www.gps-speedsurfing.com/default ... &val=78892 -

There have been a lot of questions concerning the future of the GT-31 and its successors. The production of the GT-31 has reached the “End of Life” status, so the availability will be limited in the next months. We would like to inform you about the latest developments around some new devices. Maybe you have spotted the “ThingSee One”, our technical group picked it up on the market a few weeks ago, and we have contacted the development team of “ThingSee” earlier this month. This device is not on the market yet, but based on the first technical specifications it looks very promising.

We have ordered some prototypes, and we expect them to arrive in December, and from that moment on we will work on the development of additional software to use the device on GPS-Speedsurfing.com. So a lot of work has to be done, but in the meantime please take a look at http://www.thingsee.com" onclick="window.open(this.href);return false; or maybe even support the project at kickstarter.com.

Besides the “ThingSee One” we are also working on a few other scenarios. In the next month we have some meetings with TomTom & Suunto. We want to explore the possibilities of enhancing the software of “standard” GPS-Devices. Target is to reach the current standards of GPS logging at GPS-Speedsurfing.com.

So a lot is going on at this moment at GPS-Speedsurfing.com, we will keep you posted in next months !
Verrouillé